Tcpm Workgroup RFCs

Browse Tcpm Workgroup RFCs by Number

RFC4138 - Forward RTO-Recovery (F-RTO): An Algorithm for Detecting Spurious Retransmission Timeouts with TCP and the Stream Control Transmission Protocol (SCTP): Spurious retransmission timeouts cause suboptimal TCP performance because they often result in unnecessary retransmission of the last window of data. This document describes the F-RTO detection algorithm for detecting spurious TCP retransmission timeouts. F-RTO is a TCP sender-only algorithm that does not require any TCP options to operate. After retransmitting the first unacknowledged segment triggered by a timeout, the F-RTO algorithm of the TCP sender monitors the incoming acknowledgments to determine whether the timeout was spurious. It then decides whether to send new segments or retransmit unacknowledged segments. The algorithm effectively helps to avoid additional unnecessary retransmissions and thereby improves TCP performance in the case of a spurious timeout. The F-RTO algorithm can also be applied to the Stream Control Transmission Protocol (SCTP). This memo defines an Experimental Protocol for the Internet community.
RFC4614 - A Roadmap for Transmission Control Protocol (TCP) Specification Documents: This document contains a "roadmap" to the Requests for Comments (RFC) documents relating to the Internet's Transmission Control Protocol (TCP). This roadmap provides a brief summary of the documents defining TCP and various TCP extensions that have accumulated in the RFC series. This serves as a guide and quick reference for both TCP implementers and other parties who desire information contained in the TCP-related RFCs. This memo provides information for the Internet community.
RFC4653 - Improving the Robustness of TCP to Non-Congestion Events: This document specifies Non-Congestion Robustness (NCR) for TCP. In the absence of explicit congestion notification from the network, TCP uses loss as an indication of congestion. One of the ways TCP detects loss is using the arrival of three duplicate acknowledgments. However, this heuristic is not always correct, notably in the case when network paths reorder segments (for whatever reason), resulting in degraded performance. TCP-NCR is designed to mitigate this degraded performance by increasing the number of duplicate acknowledgments required to trigger loss recovery, based on the current state of the connection, in an effort to better disambiguate true segment loss from segment reordering. This document specifies the changes to TCP, as well as the costs and benefits of these modifications. This memo defines an Experimental Protocol for the Internet community.
RFC4953 - Defending TCP Against Spoofing Attacks: Recent analysis of potential attacks on core Internet infrastructure indicates an increased vulnerability of TCP connections to spurious resets (RSTs), sent with forged IP source addresses (spoofing). TCP has always been susceptible to such RST spoofing attacks, which were indirectly protected by checking that the RST sequence number was inside the current receive window, as well as via the obfuscation of TCP endpoint and port numbers. For pairs of well-known endpoints often over predictable port pairs, such as BGP or between web servers and well-known large-scale caches, increases in the path bandwidth-delay product of a connection have sufficiently increased the receive window space that off-path third parties can brute-force generate a viable RST sequence number. The susceptibility to attack increases with the square of the bandwidth, and thus presents a significant vulnerability for recent high-speed networks. This document addresses this vulnerability, discussing proposed solutions at the transport level and their inherent challenges, as well as existing network level solutions and the feasibility of their deployment. This document focuses on vulnerabilities due to spoofed TCP segments, and includes a discussion of related ICMP spoofing attacks on TCP connections. This memo provides information for the Internet community.
RFC4987 - TCP SYN Flooding Attacks and Common Mitigations: This document describes TCP SYN flooding attacks, which have been well-known to the community for several years. Various countermeasures against these attacks, and the trade-offs of each, are described. This document archives explanations of the attack and common defense techniques for the benefit of TCP implementers and administrators of TCP servers or networks, but does not make any standards-level recommendations. This memo provides information for the Internet community.
RFC5461 - TCP's Reaction to Soft Errors: This document describes a non-standard, but widely implemented, modification to TCP's handling of ICMP soft error messages that rejects pending connection-requests when those error messages are received. This behavior reduces the likelihood of long delays between connection-establishment attempts that may arise in a number of scenarios, including one in which dual-stack nodes that have IPv6 enabled by default are deployed in IPv4 or mixed IPv4 and IPv6 environments. This memo provides information for the Internet community.
RFC5482 - TCP User Timeout Option: The TCP user timeout controls how long transmitted data may remain unacknowledged before a connection is forcefully closed. It is a local, per-connection parameter. This document specifies a new TCP option -- the TCP User Timeout Option -- that allows one end of a TCP connection to advertise its current user timeout value. This information provides advice to the other end of the TCP connection to adapt its user timeout accordingly. Increasing the user timeouts on both ends of a TCP connection allows it to survive extended periods without end-to-end connectivity. Decreasing the user timeouts allows busy servers to explicitly notify their clients that they will maintain the connection state only for a short time without connectivity. [STANDARDS-TRACK]
RFC5562 - Adding Explicit Congestion Notification (ECN) Capability to TCP's SYN/ACK Packets: The proposal in this document is Experimental. While it may be deployed in the current Internet, it does not represent a consensus that this is the best possible mechanism for the use of Explicit Congestion Notification (ECN) in TCP SYN/ACK packets.; This document describes an optional, experimental modification to RFC 3168 to allow TCP SYN/ACK packets to be ECN-Capable. For TCP, RFC 3168 specifies setting an ECN-Capable codepoint on data packets, but not on SYN and SYN/ACK packets. However, because of the high cost to the TCP transfer of having a SYN/ACK packet dropped, with the resulting retransmission timeout, this document describes the use of ECN for the SYN/ACK packet itself, when sent in response to a SYN packet with the two ECN flags set in the TCP header, indicating a willingness to use ECN. Setting the initial TCP SYN/ACK packet as ECN-Capable can be of great benefit to the TCP connection, avoiding the severe penalty of a retransmission timeout for a connection that has not yet started placing a load on the network. The TCP responder (the sender of the SYN/ACK packet) must reply to a report of an ECN-marked SYN/ACK packet by resending a SYN/ACK packet that is not ECN-Capable. If the resent SYN/ACK packet is acknowledged, then the TCP responder reduces its initial congestion window from two, three, or four segments to one segment, thereby reducing the subsequent load from that connection on the network. If instead the SYN/ACK packet is dropped, or for some other reason the TCP responder does not receive an acknowledgement in the specified time, the TCP responder follows TCP standards for a dropped SYN/ACK packet (setting the retransmission timer). This memo defines an Experimental Protocol for the Internet community.
RFC5681 - TCP Congestion Control: This document defines TCP's four intertwined congestion control algorithms: slow start, congestion avoidance, fast retransmit, and fast recovery. In addition, the document specifies how TCP should begin transmission after a relatively long idle period, as well as discussing various acknowledgment generation methods. This document obsoletes RFC 2581. [STANDARDS-TRACK]
RFC5682 - Forward RTO-Recovery (F-RTO): An Algorithm for Detecting Spurious Retransmission Timeouts with TCP: The purpose of this document is to move the F-RTO (Forward RTO-Recovery) functionality for TCP in RFC 4138 from Experimental to Standards Track status. The F-RTO support for Stream Control Transmission Protocol (SCTP) in RFC 4138 remains with Experimental status. See Appendix B for the differences between this document and RFC 4138.; Spurious retransmission timeouts cause suboptimal TCP performance because they often result in unnecessary retransmission of the last window of data. This document describes the F-RTO detection algorithm for detecting spurious TCP retransmission timeouts. F-RTO is a TCP sender-only algorithm that does not require any TCP options to operate. After retransmitting the first unacknowledged segment triggered by a timeout, the F-RTO algorithm of the TCP sender monitors the incoming acknowledgments to determine whether the timeout was spurious. It then decides whether to send new segments or retransmit unacknowledged segments. The algorithm effectively helps to avoid additional unnecessary retransmissions and thereby improves TCP performance in the case of a spurious timeout. [STANDARDS-TRACK]
RFC5827 - Early Retransmit for TCP and Stream Control Transmission Protocol (SCTP): This document proposes a new mechanism for TCP and Stream Control Transmission Protocol (SCTP) that can be used to recover lost segments when a connection's congestion window is small. The "Early Retransmit" mechanism allows the transport to reduce, in certain special circumstances, the number of duplicate acknowledgments required to trigger a fast retransmission. This allows the transport to use fast retransmit to recover segment losses that would otherwise require a lengthy retransmission timeout. [STANDARDS-TRACK]
RFC5925 - The TCP Authentication Option: This document specifies the TCP Authentication Option (TCP-AO), which obsoletes the TCP MD5 Signature option of RFC 2385 (TCP MD5). TCP-AO specifies the use of stronger Message Authentication Codes (MACs), protects against replays even for long-lived TCP connections, and provides more details on the association of security with TCP connections than TCP MD5. TCP-AO is compatible with either a static Master Key Tuple (MKT) configuration or an external, out-of-band MKT management mechanism; in either case, TCP-AO also protects connections when using the same MKT across repeated instances of a connection, using traffic keys derived from the MKT, and coordinates MKT changes between endpoints. The result is intended to support current infrastructure uses of TCP MD5, such as to protect long-lived connections (as used, e.g., in BGP and LDP), and to support a larger set of MACs with minimal other system and operational changes. TCP-AO uses a different option identifier than TCP MD5, even though TCP-AO and TCP MD5 are never permitted to be used simultaneously. TCP-AO supports IPv6, and is fully compatible with the proposed requirements for the replacement of TCP MD5. [STANDARDS-TRACK]
RFC5926 - Cryptographic Algorithms for the TCP Authentication Option (TCP-AO): The TCP Authentication Option (TCP-AO) relies on security algorithms to provide authentication between two end-points. There are many such algorithms available, and two TCP-AO systems cannot interoperate unless they are using the same algorithms. This document specifies the algorithms and attributes that can be used in TCP-AO's current manual keying mechanism and provides the interface for future message authentication codes (MACs). [STANDARDS-TRACK]
RFC5927 - ICMP Attacks against TCP: This document discusses the use of the Internet Control Message Protocol (ICMP) to perform a variety of attacks against the Transmission Control Protocol (TCP). Additionally, this document describes a number of widely implemented modifications to TCP's handling of ICMP error messages that help to mitigate these issues. This document is not an Internet Standards Track specification; it is published for informational purposes.
RFC5961 - Improving TCP's Robustness to Blind In-Window Attacks: TCP has historically been considered to be protected against spoofed off-path packet injection attacks by relying on the fact that it is difficult to guess the 4-tuple (the source and destination IP addresses and the source and destination ports) in combination with the 32-bit sequence number(s). A combination of increasing window sizes and applications using longer-term connections (e.g., H-323 or Border Gateway Protocol (BGP) [STANDARDS-TRACK]
RFC6069 - Making TCP More Robust to Long Connectivity Disruptions (TCP-LCD): Disruptions in end-to-end path connectivity, which last longer than one retransmission timeout, cause suboptimal TCP performance. The reason for this performance degradation is that TCP interprets segment loss induced by long connectivity disruptions as a sign of congestion, resulting in repeated retransmission timer backoffs. This, in turn, leads to a delayed detection of the re-establishment of the connection since TCP waits for the next retransmission timeout before it attempts a retransmission.; This document proposes an algorithm to make TCP more robust to long connectivity disruptions (TCP-LCD). It describes how standard ICMP messages can be exploited during timeout-based loss recovery to disambiguate true congestion loss from non-congestion loss caused by connectivity disruptions. Moreover, a reversion strategy of the retransmission timer is specified that enables a more prompt detection of whether or not the connectivity to a previously disconnected peer node has been restored. TCP-LCD is a TCP sender- only modification that effectively improves TCP performance in the case of connectivity disruptions. This document defines an Experimental Protocol for the Internet community.
RFC6093 - On the Implementation of the TCP Urgent Mechanism: This document analyzes how current TCP implementations process TCP urgent indications and how the behavior of some widely deployed middleboxes affects how end systems process urgent indications. This document updates the relevant specifications such that they accommodate current practice in processing TCP urgent indications, raises awareness about the reliability of TCP urgent indications in the Internet, and recommends against the use of urgent indications (but provides advice to applications that do). [STANDARDS-TRACK]
RFC6191 - Reducing the TIME-WAIT State Using TCP Timestamps: This document describes an algorithm for processing incoming SYN segments that allows higher connection-establishment rates between any two TCP endpoints when a TCP Timestamps option is present in the incoming SYN segment. This document only modifies processing of SYN segments received for connections in the TIME-WAIT state; processing in all other states is unchanged. This memo documents an Internet Best Current Practice.
RFC6247 - Moving the Undeployed TCP Extensions RFC 1072, RFC 1106, RFC 1110, RFC 1145, RFC 1146, RFC 1379, RFC 1644, and RFC 1693 to Historic Status: This document reclassifies several TCP extensions that have never seen widespread use to Historic status. The affected RFCs are RFC 1072, RFC 1106, RFC 1110, RFC 1145, RFC 1146, RFC 1379, RFC 1644, and RFC 1693. This document is not an Internet Standards Track specification; it is published for informational purposes.
RFC6298 - Computing TCP's Retransmission Timer: This document defines the standard algorithm that Transmission Control Protocol (TCP) senders are required to use to compute and manage their retransmission timer. It expands on the discussion in Section 4.2.3.1 of RFC 1122 and upgrades the requirement of supporting the algorithm from a SHOULD to a MUST. This document obsoletes RFC 2988. [STANDARDS-TRACK]
RFC6429 - TCP Sender Clarification for Persist Condition: This document clarifies the Zero Window Probes (ZWPs) described in RFC 1122 ("Requirements for Internet Hosts -- Communication Layers"). In particular, it clarifies the actions that can be taken on connections that are experiencing the ZWP condition. Rather than making a change to the standard, this document clarifies what has been until now a misinterpretation of the standard as specified in RFC 1122. This document is not an Internet Standards Track specification; it is published for informational purposes.
RFC6528 - Defending against Sequence Number Attacks: This document specifies an algorithm for the generation of TCP Initial Sequence Numbers (ISNs), such that the chances of an off-path attacker guessing the sequence numbers in use by a target connection are reduced. This document revises (and formally obsoletes) RFC 1948, and takes the ISN generation algorithm originally proposed in that document to Standards Track, formally updating RFC 793. [STANDARDS-TRACK]
RFC6582 - The NewReno Modification to TCP's Fast Recovery Algorithm: RFC 5681 documents the following four intertwined TCP congestion control algorithms: slow start, congestion avoidance, fast retransmit, and fast recovery. RFC 5681 explicitly allows certain modifications of these algorithms, including modifications that use the TCP Selective Acknowledgment (SACK) option (RFC 2883), and modifications that respond to "partial acknowledgments" (ACKs that cover new data, but not all the data outstanding when loss was detected) in the absence of SACK. This document describes a specific algorithm for responding to partial acknowledgments, referred to as "NewReno". This response to partial acknowledgments was first proposed by Janey Hoe. This document obsoletes RFC 3782. [STANDARDS-TRACK]
RFC6675 - A Conservative Loss Recovery Algorithm Based on Selective Acknowledgment (SACK) for TCP: This document presents a conservative loss recovery algorithm for TCP that is based on the use of the selective acknowledgment (SACK) TCP option. The algorithm presented in this document conforms to the spirit of the current congestion control specification (RFC 5681), but allows TCP senders to recover more effectively when multiple segments are lost from a single flight of data. This document obsoletes RFC 3517 and describes changes from it. [STANDARDS-TRACK]
RFC6691 - TCP Options and Maximum Segment Size (MSS): This memo discusses what value to use with the TCP Maximum Segment Size (MSS) option, and updates RFC 879 and RFC 2385. This document is not an Internet Standards Track specification; it is published for informational purposes.
RFC6928 - Increasing TCP's Initial Window: This document proposes an experiment to increase the permitted TCP initial window (IW) from between 2 and 4 segments, as specified in RFC 3390, to 10 segments with a fallback to the existing recommendation when performance issues are detected. It discusses the motivation behind the increase, the advantages and disadvantages of the higher initial window, and presents results from several large-scale experiments showing that the higher initial window improves the overall performance of many web services without resulting in a congestion collapse. The document closes with a discussion of usage and deployment for further experimental purposes recommended by the IETF TCP Maintenance and Minor Extensions (TCPM) working group.
RFC6937 - Proportional Rate Reduction for TCP: This document describes an experimental Proportional Rate Reduction (PRR) algorithm as an alternative to the widely deployed Fast Recovery and Rate-Halving algorithms. These algorithms determine the amount of data sent by TCP during loss recovery. PRR minimizes excess window adjustments, and the actual window size at the end of recovery will be as close as possible to the ssthresh, as determined by the congestion control algorithm.
RFC6994 - Shared Use of Experimental TCP Options: This document describes how the experimental TCP option codepoints can concurrently support multiple TCP extensions, even within the same connection, using a new IANA TCP experiment identifier. This approach is robust to experiments that are not registered and to those that do not use this sharing mechanism. It is recommended for all new TCP options that use these codepoints.
RFC7323 - TCP Extensions for High Performance: This document specifies a set of TCP extensions to improve performance over paths with a large bandwidth * delay product and to provide reliable operation over very high-speed paths. It defines the TCP Window Scale (WS) option and the TCP Timestamps (TS) option and their semantics. The Window Scale option is used to support larger receive windows, while the Timestamps option can be used for at least two distinct mechanisms, Protection Against Wrapped Sequences (PAWS) and Round-Trip Time Measurement (RTTM), that are also described herein.; This document obsoletes RFC 1323 and describes changes from it.
RFC7413 - TCP Fast Open: This document describes an experimental TCP mechanism called TCP Fast Open (TFO). TFO allows data to be carried in the SYN and SYN-ACK packets and consumed by the receiving end during the initial connection handshake, and saves up to one full round-trip time (RTT) compared to the standard TCP, which requires a three-way handshake (3WHS) to complete before data can be exchanged. However, TFO deviates from the standard TCP semantics, since the data in the SYN could be replayed to an application in some rare circumstances. Applications should not use TFO unless they can tolerate this issue, as detailed in the Applicability section.
RFC7414 - A Roadmap for Transmission Control Protocol (TCP) Specification Documents: This document contains a roadmap to the Request for Comments (RFC) documents relating to the Internet's Transmission Control Protocol (TCP). This roadmap provides a brief summary of the documents defining TCP and various TCP extensions that have accumulated in the RFC series. This serves as a guide and quick reference for both TCP implementers and other parties who desire information contained in the TCP-related RFCs.; This document obsoletes RFC 4614.
RFC7560 - Problem Statement and Requirements for Increased Accuracy in Explicit Congestion Notification (ECN) Feedback: Explicit Congestion Notification (ECN) is a mechanism where network nodes can mark IP packets, instead of dropping them, to indicate congestion to the endpoints. An ECN-capable receiver will feed this information back to the sender. ECN is specified for TCP in such a way that it can only feed back one congestion signal per Round-Trip Time (RTT). In contrast, ECN for other transport protocols, such as RTP/UDP and SCTP, is specified with more accurate ECN feedback. Recent new TCP mechanisms (like Congestion Exposure (ConEx) or Data Center TCP (DCTCP)) need more accurate ECN feedback in the case where more than one marking is received in one RTT. This document specifies requirements for an update to the TCP protocol to provide more accurate ECN feedback.
RFC7661 - Updating TCP to Support Rate-Limited Traffic: This document provides a mechanism to address issues that arise when TCP is used for traffic that exhibits periods where the sending rate is limited by the application rather than the congestion window. It provides an experimental update to TCP that allows a TCP sender to restart quickly following a rate-limited interval. This method is expected to benefit applications that send rate-limited traffic using TCP while also providing an appropriate response if congestion is experienced.; This document also evaluates the Experimental specification of TCP Congestion Window Validation (CWV) defined in RFC 2861 and concludes that RFC 2861 sought to address important issues but failed to deliver a widely used solution. This document therefore reclassifies the status of RFC 2861 from Experimental to Historic. This document obsoletes RFC 2861.
RFC7765 - TCP and Stream Control Transmission Protocol (SCTP) RTO Restart: This document describes a modified sender-side algorithm for managing the TCP and Stream Control Transmission Protocol (SCTP) retransmission timers that provides faster loss recovery when there is a small amount of outstanding data for a connection. The modification, RTO Restart (RTOR), allows the transport to restart its retransmission timer using a smaller timeout duration, so that the effective retransmission timeout (RTO) becomes more aggressive in situations where fast retransmit cannot be used. This enables faster loss detection and recovery for connections that are short lived or application limited.
RFC7805 - Moving Outdated TCP Extensions and TCP-Related Documents to Historic or Informational Status: This document reclassifies several TCP extensions and TCP-related documents that either have been superseded, have never seen widespread use, or are no longer recommended for use to "Historic" status. The affected documents are RFCs 675, 721, 761, 813, 816, 879, 896, 1078, and 6013. Additionally, this document reclassifies RFCs 700, 794, 814, 817, 872, 889, 964, and 1071 to "Informational" status.
RFC8257 - Data Center TCP (DCTCP): TCP Congestion Control for Data Centers: This Informational RFC describes Data Center TCP (DCTCP): a TCP congestion control scheme for data-center traffic. DCTCP extends the Explicit Congestion Notification (ECN) processing to estimate the fraction of bytes that encounter congestion rather than simply detecting that some congestion has occurred. DCTCP then scales the TCP congestion window based on this estimate. This method achieves high-burst tolerance, low latency, and high throughput with shallow- buffered switches. This memo also discusses deployment issues related to the coexistence of DCTCP and conventional TCP, discusses the lack of a negotiating mechanism between sender and receiver, and presents some possible mitigations. This memo documents DCTCP as currently implemented by several major operating systems. DCTCP, as described in this specification, is applicable to deployments in controlled environments like data centers, but it must not be deployed over the public Internet without additional measures.
RFC8312 - CUBIC for Fast Long-Distance Networks: CUBIC is an extension to the current TCP standards. It differs from the current TCP standards only in the congestion control algorithm on the sender side. In particular, it uses a cubic function instead of a linear window increase function of the current TCP standards to improve scalability and stability under fast and long-distance networks. CUBIC and its predecessor algorithm have been adopted as defaults by Linux and have been used for many years. This document provides a specification of CUBIC to enable third-party implementations and to solicit community feedback through experimentation on the performance of CUBIC.
RFC8511 - TCP Alternative Backoff with ECN (ABE): Active Queue Management (AQM) mechanisms allow for burst tolerance while enforcing short queues to minimise the time that packets spend enqueued at a bottleneck. This can cause noticeable performance degradation for TCP connections traversing such a bottleneck, especially if there are only a few flows or their bandwidth-delay product (BDP) is large. The reception of a Congestion Experienced (CE) Explicit Congestion Notification (ECN) mark indicates that an AQM mechanism is used at the bottleneck, and the bottleneck network queue is therefore likely to be short. Feedback of this signal allows the TCP sender-side ECN reaction in congestion avoidance to reduce the Congestion Window (cwnd) by a smaller amount than the congestion control algorithm's reaction to inferred packet loss. Therefore, this specification defines an experimental change to the TCP reaction specified in RFC 3168, as permitted by RFC 8311.
RFC8803 - 0-RTT TCP Convert Protocol: This document specifies an application proxy, called Transport Converter, to assist the deployment of TCP extensions such as Multipath TCP. A Transport Converter may provide conversion service for one or more TCP extensions. The conversion service is provided by means of the 0-RTT TCP Convert Protocol (Convert).; This protocol provides 0-RTT (Zero Round-Trip Time) conversion service since no extra delay is induced by the protocol compared to connections that are not proxied. Also, the Convert Protocol does not require any encapsulation (no tunnels whatsoever).; This specification assumes an explicit model, where the Transport Converter is explicitly configured on hosts. As a sample applicability use case, this document specifies how the Convert Protocol applies for Multipath TCP.
RFC8961 - Requirements for Time-Based Loss Detection: Many protocols must detect packet loss for various reasons (e.g., to ensure reliability using retransmissions or to understand the level of congestion along a network path). While many mechanisms have been designed to detect loss, ultimately, protocols can only count on the passage of time without delivery confirmation to declare a packet "lost". Each implementation of a time-based loss detection mechanism represents a balance between correctness and timeliness; therefore, no implementation suits all situations. This document provides high-level requirements for time-based loss detectors appropriate for general use in unicast communication across the Internet. Within the requirements, implementations have latitude to define particulars that best address each situation.
RFC8985 - The RACK-TLP Loss Detection Algorithm for TCP: This document presents the RACK-TLP loss detection algorithm for TCP. RACK-TLP uses per-segment transmit timestamps and selective acknowledgments (SACKs) and has two parts. Recent Acknowledgment (RACK) starts fast recovery quickly using time-based inferences derived from acknowledgment (ACK) feedback, and Tail Loss Probe (TLP) leverages RACK and sends a probe packet to trigger ACK feedback to avoid retransmission timeout (RTO) events. Compared to the widely used duplicate acknowledgment (DupAck) threshold approach, RACK-TLP detects losses more efficiently when there are application-limited flights of data, lost retransmissions, or data packet reordering events. It is intended to be an alternative to the DupAck threshold approach.
RFC9040 - TCP Control Block Interdependence: This memo provides guidance to TCP implementers that is intended to help improve connection convergence to steady-state operation without affecting interoperability. It updates and replaces RFC 2140's description of sharing TCP state, as typically represented in TCP Control Blocks, among similar concurrent or consecutive connections.
RFC9235 - TCP Authentication Option (TCP-AO) Test Vectors: This document provides test vectors to validate implementations of the two mandatory authentication algorithms specified for the TCP Authentication Option over both IPv4 and IPv6. This includes validation of the key derivation function (KDF) based on a set of test connection parameters as well as validation of the message authentication code (MAC). Vectors are provided for both currently required pairs of KDF and MAC algorithms: KDF_HMAC_SHA1 and HMAC- SHA-1-96, and KDF_AES_128_CMAC and AES-128-CMAC-96. The vectors also validate both whole TCP segments as well as segments whose options are excluded for middlebox traversal.
RFC9293 - Transmission Control Protocol (TCP): This document specifies the Transmission Control Protocol (TCP). TCP is an important transport-layer protocol in the Internet protocol stack, and it has continuously evolved over decades of use and growth of the Internet. Over this time, a number of changes have been made to TCP as it was specified in RFC 793, though these have only been documented in a piecemeal fashion. This document collects and brings those changes together with the protocol specification from RFC 793. This document obsoletes RFC 793, as well as RFCs 879, 2873, 6093, 6429, 6528, and 6691 that updated parts of RFC 793. It updates RFCs 1011 and 1122, and it should be considered as a replacement for the portions of those documents dealing with TCP requirements. It also updates RFC 5961 by adding a small clarification in reset handling while in the SYN-RECEIVED state. The TCP header control bits from RFC 793 have also been updated based on RFC 3168.
RFC9406 - HyStart++: Modified Slow Start for TCP: This document describes HyStart++, a simple modification to the slow start phase of congestion control algorithms. Slow start can overshoot the ideal send rate in many cases, causing high packet loss and poor performance. HyStart++ uses increase in round-trip delay as a heuristic to find an exit point before possible overshoot. It also adds a mitigation to prevent jitter from causing premature slow start exit.
RFC9438 - CUBIC for Fast and Long-Distance Networks: CUBIC is a standard TCP congestion control algorithm that uses a cubic function instead of a linear congestion window increase function to improve scalability and stability over fast and long-distance networks. CUBIC has been adopted as the default TCP congestion control algorithm by the Linux, Windows, and Apple stacks.; This document updates the specification of CUBIC to include algorithmic improvements based on these implementations and recent academic work. Based on the extensive deployment experience with CUBIC, this document also moves the specification to the Standards Track and obsoletes RFC 8312. This document also updates RFC 5681, to allow for CUBIC's occasionally more aggressive sending behavior.
RFC9648 - YANG Data Model for TCP: This document specifies a minimal YANG data model for TCP on devices that are configured and managed by network management protocols. The YANG data model defines a container for all TCP connections and groupings of authentication parameters that can be imported and used in TCP implementations or by other models that need to configure TCP parameters. The model also includes basic TCP statistics. The model is compliant with Network Management Datastore Architecture (NMDA) (RFC 8342).