16ng Workgroup RFCs

Browse 16ng Workgroup RFCs by Number

RFC4968 - Analysis of IPv6 Link Models for 802.16 Based Networks

This document provides different IPv6 link models that are suitable for IEEE 802.16 based networks and provides analysis of various considerations for each link model and the applicability of each link model under different deployment scenarios. This document is the result of a design team (DT) that was formed to analyze the IPv6 link models for IEEE 802.16 based networks. This memo provides information for the Internet community.

RFC5121 - Transmission of IPv6 via the IPv6 Convergence Sublayer over IEEE 802.16 Networks

IEEE Std 802.16 is an air interface specification for fixed and mobile Broadband Wireless Access Systems. Service-specific convergence sublayers to which upper-layer protocols interface are a part of the IEEE 802.16 MAC (Medium Access Control). The Packet convergence sublayer (CS) is used for the transport of all packet- based protocols such as Internet Protocol (IP) and IEEE 802.3 LAN/MAN CSMA/CD Access Method (Ethernet). IPv6 packets can be sent and received via the IP-specific part of the Packet CS. This document specifies the addressing and operation of IPv6 over the IP-specific part of the Packet CS for hosts served by a network that utilizes the IEEE Std 802.16 air interface. It recommends the assignment of a unique prefix (or prefixes) to each host and allows the host to use multiple identifiers within that prefix, including support for randomly generated interface identifiers. [STANDARDS-TRACK]

RFC5154 - IP over IEEE 802.16 Problem Statement and Goals

This document specifies problems in running IP over IEEE 802.16 networks by identifying specific gaps in the IEEE 802.16 Media Access Control (MAC) for IPv4 and IPv6 support. This document also provides an overview of IEEE 802.16 network characteristics and convergence sublayers. Common terminology used for the base guideline while defining the solution framework is also presented. This memo provides information for the Internet community.

RFC5692 - Transmission of IP over Ethernet over IEEE 802.16 Networks

This document describes the transmission of IPv4 over Ethernet, as well as IPv6 over Ethernet, in an access network deploying the IEEE 802.16 cellular radio transmission technology. The Ethernet on top of IEEE 802.16 is realized by bridging connections that IEEE 802.16 provides between a base station and its associated subscriber stations. Due to the resource constraints of radio transmission systems and the limitations of the IEEE 802.16 Media Access Control (MAC) functionality for the realization of an Ethernet, the transmission of IP over Ethernet over IEEE 802.16 may considerably benefit by adding IP-specific support functions in the Ethernet over IEEE 802.16 while maintaining full compatibility with standard IP over Ethernet behavior. [STANDARDS-TRACK]

RFC5948 - Transmission of IPv4 Packets over the IP Convergence Sublayer of IEEE 802.16

IEEE 802.16 is an air interface specification for wireless broadband access. IEEE 802.16 has specified multiple service-specific Convergence Sublayers for transmitting upper-layer protocols. The Packet CS (Packet Convergence Sublayer) is used for the transport of all packet-based protocols such as the Internet Protocol (IP) and IEEE 802.3 (Ethernet). The IP-specific part of the Packet CS enables the transport of IPv4 packets directly over the IEEE 802.16 Media Access Control (MAC) layer.

This document specifies the frame format, the Maximum Transmission Unit (MTU), and the address assignment procedures for transmitting IPv4 packets over the IP-specific part of the Packet Convergence Sublayer of IEEE 802.16. [STANDARDS-TRACK]