Home

Mmusic Workgroup RFCs

Browse Mmusic Workgroup RFCs by Number

RFC7604 - Comparison of Different NAT Traversal Techniques for Media Controlled by the Real-Time Streaming Protocol (RTSP)
This document describes several Network Address Translator (NAT) traversal techniques that were considered to be used for establishing the RTP media flows controlled by the Real-Time Streaming Protocol (RTSP). Each technique includes a description of how it would be used, the security implications of using it, and any other deployment considerations it has. There are also discussions on how NAT traversal techniques relate to firewalls and how each technique can be applied in different use cases. These findings were used when selecting the NAT traversal for RTSP 2.0, which is specified in a separate document.
RFC7825 - A Network Address Translator (NAT) Traversal Mechanism for Media Controlled by the Real-Time Streaming Protocol (RTSP)
This document defines a solution for Network Address Translation (NAT) traversal for datagram-based media streams set up and controlled with the Real-Time Streaming Protocol version 2 (RTSP 2.0). It uses Interactive Connectivity Establishment (ICE) adapted to use RTSP as a signaling channel, defining the necessary RTSP extensions and procedures.
RFC7826 - Real-Time Streaming Protocol Version 2.0
This memorandum defines the Real-Time Streaming Protocol (RTSP) version 2.0, which obsoletes RTSP version 1.0 defined in RFC 2326.
RTSP is an application-layer protocol for the setup and control of the delivery of data with real-time properties. RTSP provides an extensible framework to enable controlled, on-demand delivery of real-time data, such as audio and video. Sources of data can include both live data feeds and stored clips. This protocol is intended to control multiple data delivery sessions; provide a means for choosing delivery channels such as UDP, multicast UDP, and TCP; and provide a means for choosing delivery mechanisms based upon RTP (RFC 3550).
RFC7850 - Registering Values of the SDP 'proto' Field for Transporting RTP Media over TCP under Various RTP Profiles
The Real-time Transport Protocol (RTP) specification establishes a registry of profile names for use by higher-level control protocols, such as the Session Description Protocol (SDP), to refer to the transport methods. This specification describes the following new SDP transport protocol identifiers for transporting RTP Media over TCP: 'TCP/RTP/AVPF', 'TCP/RTP/SAVP', 'TCP/RTP/SAVPF', 'TCP/DTLS/RTP/SAVP', 'TCP/DTLS/RTP/SAVPF', 'TCP/TLS/RTP/AVP', and 'TCP/TLS/RTP/AVPF'.
RFC8122 - Connection-Oriented Media Transport over the Transport Layer Security (TLS) Protocol in the Session Description Protocol (SDP)
This document specifies how to establish secure connection-oriented media transport sessions over the Transport Layer Security (TLS) protocol using the Session Description Protocol (SDP). It defines the SDP protocol identifier, 'TCP/TLS'. It also defines the syntax and semantics for an SDP 'fingerprint' attribute that identifies the certificate that will be presented for the TLS session. This mechanism allows media transport over TLS connections to be established securely, so long as the integrity of session descriptions is assured.
This document obsoletes RFC 4572 by clarifying the usage of multiple fingerprints.
RFC8830 - WebRTC MediaStream Identification in the Session Description Protocol
This document specifies a Session Description Protocol (SDP) grouping mechanism for RTP media streams that can be used to specify relations between media streams.
This mechanism is used to signal the association between the SDP concept of "media description" and the Web Real-Time Communication (WebRTC) concept of MediaStream/MediaStreamTrack using SDP signaling.
RFC8839 - Session Description Protocol (SDP) Offer/Answer Procedures for Interactive Connectivity Establishment (ICE)
This document describes Session Description Protocol (SDP) Offer/Answer procedures for carrying out Interactive Connectivity Establishment (ICE) between the agents.
This document obsoletes RFCs 5245 and 6336.
RFC8840 - A Session Initiation Protocol (SIP) Usage for Incremental Provisioning of Candidates for the Interactive Connectivity Establishment (Trickle ICE)
The Interactive Connectivity Establishment (ICE) protocol describes a Network Address Translator (NAT) traversal mechanism for UDP-based multimedia sessions established with the Offer/Answer model. The ICE extension for Incremental Provisioning of Candidates (Trickle ICE) defines a mechanism that allows ICE Agents to shorten session establishment delays by making the candidate gathering and connectivity checking phases of ICE non-blocking and by executing them in parallel.
This document defines usage semantics for Trickle ICE with the Session Initiation Protocol (SIP). The document also defines a new SIP Info Package to support this usage together with the corresponding media type. Additionally, a new Session Description Protocol (SDP) "end-of-candidates" attribute and a new SIP option tag "trickle-ice" are defined.
RFC8841 - Session Description Protocol (SDP) Offer/Answer Procedures for Stream Control Transmission Protocol (SCTP) over Datagram Transport Layer Security (DTLS) Transport
The Stream Control Transmission Protocol (SCTP) is a transport protocol used to establish associations between two endpoints. RFC 8261 specifies how SCTP can be used on top of the Datagram Transport Layer Security (DTLS) protocol, which is referred to as SCTP-over-DTLS.
This specification defines the following new Session Description Protocol (SDP) protocol identifiers (proto values): "UDP/DTLS/SCTP" and "TCP/DTLS/SCTP". This specification also specifies how to use the new proto values with the SDP offer/answer mechanism for negotiating SCTP-over-DTLS associations.
RFC8842 - Session Description Protocol (SDP) Offer/Answer Considerations for Datagram Transport Layer Security (DTLS) and Transport Layer Security (TLS)
This document defines the Session Description Protocol (SDP) offer/answer procedures for negotiating and establishing a Datagram Transport Layer Security (DTLS) association. The document also defines the criteria for when a new DTLS association must be established. The document updates RFCs 5763 and 7345 by replacing common SDP offer/answer procedures with a reference to this specification.
This document defines a new SDP media-level attribute, "tls-id".
This document also defines how the "tls-id" attribute can be used for negotiating and establishing a Transport Layer Security (TLS) connection, in conjunction with the procedures in RFCs 4145 and 8122.
RFC8843 - Negotiating Media Multiplexing Using the Session Description Protocol (SDP)
This specification defines a new Session Description Protocol (SDP) Grouping Framework extension called 'BUNDLE'. The extension can be used with the SDP offer/answer mechanism to negotiate the usage of a single transport (5-tuple) for sending and receiving media described by multiple SDP media descriptions ("m=" sections). Such transport is referred to as a BUNDLE transport, and the media is referred to as bundled media. The "m=" sections that use the BUNDLE transport form a BUNDLE group.
This specification defines a new RTP Control Protocol (RTCP) Source Description (SDES) item and a new RTP header extension.
This specification updates RFCs 3264, 5888, and 7941.
RFC8844 - Unknown Key-Share Attacks on Uses of TLS with the Session Description Protocol (SDP)
This document describes unknown key-share attacks on the use of Datagram Transport Layer Security for the Secure Real-Time Transport Protocol (DTLS-SRTP). Similar attacks are described on the use of DTLS-SRTP with the identity bindings used in Web Real-Time Communications (WebRTC) and SIP identity. These attacks are difficult to mount, but they cause a victim to be misled about the identity of a communicating peer. This document defines mitigation techniques that implementations of RFC 8122 are encouraged to deploy.
RFC8851 - RTP Payload Format Restrictions
In this specification, we define a framework for specifying restrictions on RTP streams in the Session Description Protocol (SDP). This framework defines a new "rid" ("restriction identifier") SDP attribute to unambiguously identify the RTP streams within an RTP session and restrict the streams' payload format parameters in a codec-agnostic way beyond what is provided with the regular payload types.
This specification updates RFC 4855 to give additional guidance on choice of Format Parameter (fmtp) names and their relation to the restrictions defined by this document.
RFC8853 - Using Simulcast in Session Description Protocol (SDP) and RTP Sessions
In some application scenarios, it may be desirable to send multiple differently encoded versions of the same media source in different RTP streams. This is called simulcast. This document describes how to accomplish simulcast in RTP and how to signal it in the Session Description Protocol (SDP). The described solution uses an RTP/RTCP identification method to identify RTP streams belonging to the same media source and makes an extension to SDP to indicate that those RTP streams are different simulcast formats of that media source. The SDP extension consists of a new media-level SDP attribute that expresses capability to send and/or receive simulcast RTP streams.
RFC8858 - Indicating Exclusive Support of RTP and RTP Control Protocol (RTCP) Multiplexing Using the Session Description Protocol (SDP)
This document defines a new Session Description Protocol (SDP) media-level attribute, 'rtcp-mux-only', that can be used by an endpoint to indicate exclusive support of RTP and RTP Control Protocol (RTCP) multiplexing. The document also updates RFC 5761 by clarifying that an offerer can use a mechanism to indicate that it is not able to send and receive RTCP on separate ports.
RFC8859 - A Framework for Session Description Protocol (SDP) Attributes When Multiplexing
The purpose of this specification is to provide a framework for analyzing the multiplexing characteristics of Session Description Protocol (SDP) attributes when SDP is used to negotiate the usage of a single 5-tuple for sending and receiving media associated with multiple media descriptions.
This specification also categorizes the existing SDP attributes based on the framework described herein.
RFC8864 - Negotiation Data Channels Using the Session Description Protocol (SDP)
Data channel setup can be done using either the in-band Data Channel Establishment Protocol (DCEP) or some out-of-band non-DCEP protocol. This document specifies how the SDP (Session Description Protocol) offer/answer exchange can be used to achieve an out-of-band non-DCEP negotiation for establishing a data channel.
RFC8865 - T.140 Real-Time Text Conversation over WebRTC Data Channels
This document specifies how a Web Real-Time Communication (WebRTC) data channel can be used as a transport mechanism for real-time text using the ITU-T Protocol for multimedia application text conversation (Recommendation ITU-T T.140) and how the Session Description Protocol (SDP) offer/answer mechanism can be used to negotiate such a data channel, referred to as a T.140 data channel. This document updates RFC 8373 to specify its use with WebRTC data channels.
RFC8866 - SDP: Session Description Protocol
This memo defines the Session Description Protocol (SDP). SDP is intended for describing multimedia sessions for the purposes of session announcement, session invitation, and other forms of multimedia session initiation. This document obsoletes RFC 4566.
RFC8873 - Message Session Relay Protocol (MSRP) over Data Channels
This document specifies how a Web Real-Time Communication (WebRTC) data channel can be used as a transport mechanism for the Message Session Relay Protocol (MSRP) and how the Session Description Protocol (SDP) offer/answer mechanism can be used to negotiate such a data channel, referred to as an MSRP data channel. Two network configurations are supported: the connection of two MSRP data channel endpoints; and a gateway configuration, which connects an MSRP data channel endpoint with an MSRP endpoint that uses either TCP or TLS. This document updates RFC 4975.
RFC9143 - Negotiating Media Multiplexing Using the Session Description Protocol (SDP)
This specification defines a new Session Description Protocol (SDP) Grouping Framework extension called 'BUNDLE'. The extension can be used with the SDP offer/answer mechanism to negotiate the usage of a single transport (5-tuple) for sending and receiving media described by multiple SDP media descriptions ("m=" sections). Such transport is referred to as a "BUNDLE transport", and the media is referred to as "bundled media". The "m=" sections that use the BUNDLE transport form a BUNDLE group.
This specification defines a new RTP Control Protocol (RTCP) Source Description (SDES) item and a new RTP header extension.
This specification updates RFCs 3264, 5888, and 7941.
This specification obsoletes RFC 8843.