Home
You are not currently signed in.

RFC5256

  1. RFC 5256
Network Working Group                                         M. Crispin
Request for Comments: 5256                             Panda Programming
Category: Standards Track                                   K. Murchison
                                              Carnegie Mellon University
                                                               June 2008


     Internet Message Access Protocol - SORT and THREAD Extensions

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Abstract

   This document describes the base-level server-based sorting and
   threading extensions to the IMAP protocol.  These extensions provide
   substantial performance improvements for IMAP clients that offer
   sorted and threaded views.

1.  Introduction

   The SORT and THREAD extensions to the [IMAP] protocol provide a means
   of server-based sorting and threading of messages, without requiring
   that the client download the necessary data to do so itself.  This is
   particularly useful for online clients as described in [IMAP-MODELS].

   A server that supports the base-level SORT extension indicates this
   with a capability name which starts with "SORT".  Future, upwards-
   compatible extensions to the SORT extension will all start with
   "SORT", indicating support for this base level.

   A server that supports the THREAD extension indicates this with one
   or more capability names consisting of "THREAD=" followed by a
   supported threading algorithm name as described in this document.
   This provides for future upwards-compatible extensions.

   A server that implements the SORT and/or THREAD extensions MUST
   collate strings in accordance with the requirements of I18NLEVEL=1,
   as described in [IMAP-I18N], and SHOULD implement and advertise the
   I18NLEVEL=1 extension.  Alternatively, a server MAY implement
   I18NLEVEL=2 (or higher) and comply with the rules of that level.





Crispin & Murchison         Standards Track                     [Page 1]
RFC 5256                       IMAP Sort                       June 2008


      Discussion: The SORT and THREAD extensions predate [IMAP-I18N] by
      several years.  At the time of this writing, all known server
      implementations of SORT and THREAD comply with the rules of
      I18NLEVEL=1, but do not necessarily advertise it.  As discussed in
      [IMAP-I18N] section 4.5, all server implementations should
      eventually be updated to comply with the I18NLEVEL=2 extension.

   Historical note: The REFERENCES threading algorithm is based on the
   [THREADING] algorithm written and used in "Netscape Mail and News"
   versions 2.0 through 3.0.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [KEYWORDS].

   The word "can" (not "may") is used to refer to a possible
   circumstance or situation, as opposed to an optional facility of the
   protocol.

   "User" is used to refer to a human user, whereas "client" refers to
   the software being run by the user.

   In examples, "C:" and "S:" indicate lines sent by the client and
   server, respectively.

2.1.  Base Subject

   Subject sorting and threading use the "base subject", which has
   specific subject artifacts removed.  Due to the complexity of these
   artifacts, the formal syntax for the subject extraction rules is
   ambiguous.  The following procedure is followed to determine the
   "base subject", using the [ABNF] formal syntax rules described in
   section 5:

      (1) Convert any RFC 2047 encoded-words in the subject to [UTF-8]
          as described in "Internationalization Considerations".
          Convert all tabs and continuations to space.  Convert all
          multiple spaces to a single space.

      (2) Remove all trailing text of the subject that matches the
          subj-trailer ABNF; repeat until no more matches are possible.

      (3) Remove all prefix text of the subject that matches the subj-
          leader ABNF.





Crispin & Murchison         Standards Track                     [Page 2]
RFC 5256                       IMAP Sort                       June 2008


      (4) If there is prefix text of the subject that matches the subj-
          blob ABNF, and removing that prefix leaves a non-empty subj-
          base, then remove the prefix text.

      (5) Repeat (3) and (4) until no matches remain.

   Note: It is possible to defer step (2) until step (6), but this
   requires checking for subj-trailer in step (4).

      (6) If the resulting text begins with the subj-fwd-hdr ABNF and
          ends with the subj-fwd-trl ABNF, remove the subj-fwd-hdr and
          subj-fwd-trl and repeat from step (2).

      (7) The resulting text is the "base subject" used in the SORT.

   All servers and disconnected (as described in [IMAP-MODELS]) clients
   MUST use exactly this algorithm to determine the "base subject".
   Otherwise, there is potential for a user to get inconsistent results
   based on whether they are running in connected or disconnected mode.

2.2.  Sent Date

   As used in this document, the term "sent date" refers to the date and
   time from the Date: header, adjusted by time zone to normalize to
   UTC.  For example, "31 Dec 2000 16:01:33 -0800" is equivalent to the
   UTC date and time of "1 Jan 2001 00:01:33 +0000".

   If the time zone is invalid, the date and time SHOULD be treated as
   UTC.  If the time is also invalid, the time SHOULD be treated as
   00:00:00.  If there is no valid date or time, the date and time
   SHOULD be treated as 00:00:00 on the earliest possible date.

   This differs from the date-related criteria in the SEARCH command
   (described in [IMAP] section 6.4.4), which use just the date and not
   the time, and are not adjusted by time zone.

   If the sent date cannot be determined (a Date: header is missing or
   cannot be parsed), the INTERNALDATE for that message is used as the
   sent date.

   When comparing two sent dates that match exactly, the order in which
   the two messages appear in the mailbox (that is, by sequence number)
   is used as a tie-breaker to determine the order.








Crispin & Murchison         Standards Track                     [Page 3]
RFC 5256                       IMAP Sort                       June 2008


3.  Additional Commands

   These commands are extensions to the [IMAP] base protocol.

   The section headings are intended to correspond with where they would
   be located in the main document if they were part of the base
   specification.

BASE.6.4.SORT. SORT Command

   Arguments:  sort program
               charset specification
               searching criteria (one or more)

   Data:       untagged responses: SORT

   Result:     OK - sort completed
               NO - sort error: can't sort that charset or
                    criteria
               BAD - command unknown or arguments invalid

      The SORT command is a variant of SEARCH with sorting semantics for
      the results.  There are two arguments before the searching
      criteria argument: a parenthesized list of sort criteria, and the
      searching charset.

      The charset argument is mandatory (unlike SEARCH) and indicates
      the [CHARSET] of the strings that appear in the searching
      criteria.  The US-ASCII and [UTF-8] charsets MUST be implemented.
      All other charsets are optional.

      There is also a UID SORT command that returns unique identifiers
      instead of message sequence numbers.  Note that there are separate
      searching criteria for message sequence numbers and UIDs; thus,
      the arguments to UID SORT are interpreted the same as in SORT.
      This is analogous to the behavior of UID SEARCH, as opposed to UID
      COPY, UID FETCH, or UID STORE.

      The SORT command first searches the mailbox for messages that
      match the given searching criteria using the charset argument for
      the interpretation of strings in the searching criteria.  It then
      returns the matching messages in an untagged SORT response, sorted
      according to one or more sort criteria.

      Sorting is in ascending order.  Earlier dates sort before later
      dates; smaller sizes sort before larger sizes; and strings are
      sorted according to ascending values established by their
      collation algorithm (see "Internationalization Considerations").



Crispin & Murchison         Standards Track                     [Page 4]
RFC 5256                       IMAP Sort                       June 2008


      If two or more messages exactly match according to the sorting
      criteria, these messages are sorted according to the order in
      which they appear in the mailbox.  In other words, there is an
      implicit sort criterion of "sequence number".

      When multiple sort criteria are specified, the result is sorted in
      the priority order that the criteria appear.  For example,
      (SUBJECT DATE) will sort messages in order by their base subject
      text; and for messages with the same base subject text, it will
      sort by their sent date.

      Untagged EXPUNGE responses are not permitted while the server is
      responding to a SORT command, but are permitted during a UID SORT
      command.

      The defined sort criteria are as follows.  Refer to the Formal
      Syntax section for the precise syntactic definitions of the
      arguments.  If the associated RFC-822 header for a particular
      criterion is absent, it is treated as the empty string.  The empty
      string always collates before non-empty strings.

      ARRIVAL
         Internal date and time of the message.  This differs from the
         ON criteria in SEARCH, which uses just the internal date.

      CC
         [IMAP] addr-mailbox of the first "cc" address.

      DATE
         Sent date and time, as described in section 2.2.

      FROM
         [IMAP] addr-mailbox of the first "From" address.

      REVERSE
         Followed by another sort criterion, has the effect of that
         criterion but in reverse (descending) order.
            Note: REVERSE only reverses a single criterion, and does not
            affect the implicit "sequence number" sort criterion if all
            other criteria are identical.  Consequently, a sort of
            REVERSE SUBJECT is not the same as a reverse ordering of a
            SUBJECT sort.  This can be avoided by use of additional
            criteria, e.g., SUBJECT DATE vs. REVERSE SUBJECT REVERSE
            DATE.  In general, however, it's better (and faster, if the
            client has a "reverse current ordering" command) to reverse
            the results in the client instead of issuing a new SORT.





Crispin & Murchison         Standards Track                     [Page 5]
RFC 5256                       IMAP Sort                       June 2008


      SIZE
         Size of the message in octets.

      SUBJECT
         Base subject text.

      TO
         [IMAP] addr-mailbox of the first "To" address.

   Example:    C: A282 SORT (SUBJECT) UTF-8 SINCE 1-Feb-1994
               S: * SORT 2 84 882
               S: A282 OK SORT completed
               C: A283 SORT (SUBJECT REVERSE DATE) UTF-8 ALL
               S: * SORT 5 3 4 1 2
               S: A283 OK SORT completed
               C: A284 SORT (SUBJECT) US-ASCII TEXT "not in mailbox"
               S: * SORT
               S: A284 OK SORT completed

BASE.6.4.THREAD. THREAD Command

Arguments:  threading algorithm
            charset specification
            searching criteria (one or more)

Data:       untagged responses: THREAD

Result:     OK - thread completed
            NO - thread error: can't thread that charset or
                 criteria
            BAD - command unknown or arguments invalid

      The THREAD command is a variant of SEARCH with threading semantics
      for the results.  Thread has two arguments before the searching
      criteria argument: a threading algorithm and the searching
      charset.

      The charset argument is mandatory (unlike SEARCH) and indicates
      the [CHARSET] of the strings that appear in the searching
      criteria.  The US-ASCII and [UTF-8] charsets MUST be implemented.
      All other charsets are optional.

      There is also a UID THREAD command that returns unique identifiers
      instead of message sequence numbers.  Note that there are separate
      searching criteria for message sequence numbers and UIDs; thus the
      arguments to UID THREAD are interpreted the same as in THREAD.
      This is analogous to the behavior of UID SEARCH, as opposed to UID
      COPY, UID FETCH, or UID STORE.



Crispin & Murchison         Standards Track                     [Page 6]
RFC 5256                       IMAP Sort                       June 2008


      The THREAD command first searches the mailbox for messages that
      match the given searching criteria using the charset argument for
      the interpretation of strings in the searching criteria.  It then
      returns the matching messages in an untagged THREAD response,
      threaded according to the specified threading algorithm.

      All collation is in ascending order.  Earlier dates collate before
      later dates and strings are collated according to ascending values
      established by their collation algorithm (see
      "Internationalization Considerations").

      Untagged EXPUNGE responses are not permitted while the server is
      responding to a THREAD command, but are permitted during a UID
      THREAD command.

      The defined threading algorithms are as follows:

      ORDEREDSUBJECT

         The ORDEREDSUBJECT threading algorithm is also referred to as
         "poor man's threading".  The searched messages are sorted by
         base subject and then by the sent date.  The messages are then
         split into separate threads, with each thread containing
         messages with the same base subject text.  Finally, the threads
         are sorted by the sent date of the first message in the thread.

         The top level or "root" in ORDEREDSUBJECT threading contains
         the first message of every thread.  All messages in the root
         are siblings of each other.  The second message of a thread is
         the child of the first message, and subsequent messages of the
         thread are siblings of the second message and hence children of
         the message at the root.  Hence, there are no grandchildren in
         ORDEREDSUBJECT threading.

         Children in ORDEREDSUBJECT threading do not have descendents.
         Client implementations SHOULD treat descendents of a child in a
         server response as being siblings of that child.

      REFERENCES

         The REFERENCES threading algorithm threads the searched
         messages by grouping them together in parent/child
         relationships based on which messages are replies to others.
         The parent/child relationships are built using two methods:
         reconstructing a message's ancestry using the references
         contained within it; and checking the original (not base)
         subject of a message to see if it is a reply to (or forward of)
         another message.



Crispin & Murchison         Standards Track                     [Page 7]
RFC 5256                       IMAP Sort                       June 2008


            Note: "Message ID" in the following description refers to a
            normalized form of the msg-id in [RFC2822].  The actual text
            in RFC 2822 may use quoting, resulting in multiple ways of
            expressing the same Message ID.  Implementations of the
            REFERENCES threading algorithm MUST normalize any msg-id in
            order to avoid false non-matches due to differences in
            quoting.

            For example, the msg-id
               <"01KF8JCEOCBS0045PS"@xxx.yyy.com>
            and the msg-id
               <01KF8JCEOCBS0045PS@xxx.yyy.com>
            MUST be interpreted as being the same Message ID.

         The references used for reconstructing a message's ancestry are
         found using the following rules:

            If a message contains a References header line, then use the
            Message IDs in the References header line as the references.

            If a message does not contain a References header line, or
            the References header line does not contain any valid
            Message IDs, then use the first (if any) valid Message ID
            found in the In-Reply-To header line as the only reference
            (parent) for this message.

               Note: Although [RFC2822] permits multiple Message IDs in
               the In-Reply-To header, in actual practice this
               discipline has not been followed.  For example,
               In-Reply-To headers have been observed with message
               addresses after the Message ID, and there are no good
               heuristics for software to determine the difference.
               This is not a problem with the References header,
               however.

            If a message does not contain an In-Reply-To header line, or
            the In-Reply-To header line does not contain a valid Message
            ID, then the message does not have any references (NIL).

         A message is considered to be a reply or forward if the base
         subject extraction rules, applied to the original subject,
         remove any of the following: a subj-refwd, a "(fwd)" subj-
         trailer, or a subj-fwd-hdr and subj-fwd-trl.

         The REFERENCES algorithm is significantly more complex than
         ORDEREDSUBJECT and consists of six main steps.  These steps are
         outlined in detail below.




Crispin & Murchison         Standards Track                     [Page 8]
RFC 5256                       IMAP Sort                       June 2008


         (1) For each searched message:

             (A) Using the Message IDs in the message's references, link
                 the corresponding messages (those whose Message-ID
                 header line contains the given reference Message ID)
                 together as parent/child.  Make the first reference the
                 parent of the second (and the second a child of the
                 first), the second the parent of the third (and the
                 third a child of the second), etc.  The following rules
                 govern the creation of these links:

                     If a message does not contain a Message-ID header
                     line, or the Message-ID header line does not
                     contain a valid Message ID, then assign a unique
                     Message ID to this message.

                     If two or more messages have the same Message ID,
                     then only use that Message ID in the first (lowest
                     sequence number) message, and assign a unique
                     Message ID to each of the subsequent messages with
                     a duplicate of that Message ID.

                     If no message can be found with a given Message ID,
                     create a dummy message with this ID.  Use this
                     dummy message for all subsequent references to this
                     ID.

                     If a message already has a parent, don't change the
                     existing link.  This is done because the References
                     header line may have been truncated by a Mail User
                     Agent (MUA).  As a result, there is no guarantee
                     that the messages corresponding to adjacent Message
                     IDs in the References header line are parent and
                     child.

                     Do not create a parent/child link if creating that
                     link would introduce a loop.  For example, before
                     making message A the parent of B, make sure that A
                     is not a descendent of B.

                        Note: Message ID comparisons are case-sensitive.

             (B) Create a parent/child link between the last reference
                 (or NIL if there are no references) and the current
                 message.  If the current message already has a parent,
                 it is probably the result of a truncated References
                 header line, so break the current parent/child link
                 before creating the new correct one.  As in step 1.A,



Crispin & Murchison         Standards Track                     [Page 9]
RFC 5256                       IMAP Sort                       June 2008


                 do not create the parent/child link if creating that
                 link would introduce a loop.  Note that if this message
                 has no references, it will now have no parent.

                    Note: The parent/child links created in steps 1.A
                    and 1.B MUST be kept consistent with one another at
                    ALL times.

         (2) Gather together all of the messages that have no parents
             and make them all children (siblings of one another) of a
             dummy parent (the "root").  These messages constitute the
             first (head) message of the threads created thus far.

         (3) Prune dummy messages from the thread tree.  Traverse each
             thread under the root, and for each message:

                 If it is a dummy message with NO children, delete it.

                 If it is a dummy message with children, delete it, but
                 promote its children to the current level.  In other
                 words, splice them in with the dummy's siblings.

                 Do not promote the children if doing so would make them
                 children of the root, unless there is only one child.

         (4) Sort the messages under the root (top-level siblings only)
             by sent date as described in section 2.2.  In the case of a
             dummy message, sort its children by sent date and then use
             the first child for the top-level sort.

         (5) Gather together messages under the root that have the same
             base subject text.

             (A) Create a table for associating base subjects with
                 messages, called the subject table.

             (B) Populate the subject table with one message per each
                 base subject.  For each child of the root:

                 (i)   Find the subject of this thread, by using the
                       base subject from either the current message or
                       its first child if the current message is a
                       dummy.  This is the thread subject.

                 (ii)  If the thread subject is empty, skip this
                       message.





Crispin & Murchison         Standards Track                    [Page 10]
RFC 5256                       IMAP Sort                       June 2008


                 (iii) Look up the message associated with the thread
                       subject in the subject table.

                 (iv)  If there is no message in the subject table with
                       the thread subject, add the current message and
                       the thread subject to the subject table.

                       Otherwise, if the message in the subject table is
                       not a dummy, AND either of the following criteria
                       are true:

                           The current message is a dummy, OR

                           The message in the subject table is a reply
                           or forward and the current message is not.

                       then replace the message in the subject table
                       with the current message.

             (C) Merge threads with the same thread subject.  For each
                 child of the root:

                 (i)   Find the message's thread subject as in step
                       5.B.i above.

                 (ii)  If the thread subject is empty, skip this
                       message.

                 (iii) Lookup the message associated with this thread
                       subject in the subject table.

                 (iv)  If the message in the subject table is the
                       current message, skip this message.

                 Otherwise, merge the current message with the one in
                 the subject table using the following rules:

                     If both messages are dummies, append the current
                     message's children to the children of the message
                     in the subject table (the children of both messages
                     become siblings), and then delete the current
                     message.

                     If the message in the subject table is a dummy and
                     the current message is not, make the current
                     message a child of the message in the subject table
                     (a sibling of its children).




Crispin & Murchison         Standards Track                    [Page 11]
RFC 5256                       IMAP Sort                       June 2008


                     If the current message is a reply or forward and
                     the message in the subject table is not, make the
                     current message a child of the message in the
                     subject table (a sibling of its children).

                     Otherwise, create a new dummy message and make both
                     the current message and the message in the subject
                     table children of the dummy.  Then replace the
                     message in the subject table with the dummy
                     message.

                        Note: Subject comparisons are case-insensitive,
                        as described under "Internationalization
                        Considerations".

         (6) Traverse the messages under the root and sort each set of
             siblings by sent date as described in section 2.2.
             Traverse the messages in such a way that the "youngest" set
             of siblings are sorted first, and the "oldest" set of
             siblings are sorted last (grandchildren are sorted before
             children, etc).  In the case of a dummy message (which can
             only occur with top-level siblings), use its first child
             for sorting.

   Example:    C: A283 THREAD ORDEREDSUBJECT UTF-8 SINCE 5-MAR-2000
               S: * THREAD (166)(167)(168)(169)(172)(170)(171)
                  (173)(174 (175)(176)(178)(181)(180))(179)(177
                  (183)(182)(188)(184)(185)(186)(187)(189))(190)
                  (191)(192)(193)(194 195)(196 (197)(198))(199)
                  (200 202)(201)(203)(204)(205)(206 207)(208)
               S: A283 OK THREAD completed
               C: A284 THREAD ORDEREDSUBJECT US-ASCII TEXT "gewp"
               S: * THREAD
               S: A284 OK THREAD completed
               C: A285 THREAD REFERENCES UTF-8 SINCE 5-MAR-2000
               S: * THREAD (166)(167)(168)(169)(172)((170)(179))
                  (171)(173)((174)(175)(176)(178)(181)(180))
                  ((177)(183)(182)(188 (184)(189))(185 186)(187))
                  (190)(191)(192)(193)((194)(195 196))(197 198)
                  (199)(200 202)(201)(203)(204)(205 206 207)(208)
               S: A285 OK THREAD completed

             Note: The line breaks in the first and third server
             responses are for editorial clarity and do not appear in
             real THREAD responses.






Crispin & Murchison         Standards Track                    [Page 12]
RFC 5256                       IMAP Sort                       June 2008


4.  Additional Responses

   These responses are extensions to the [IMAP] base protocol.

   The section headings of these responses are intended to correspond
   with where they would be located in the main document.

BASE.7.2.SORT. SORT Response

   Data:       zero or more numbers

      The SORT response occurs as a result of a SORT or UID SORT
      command.  The number(s) refer to those messages that match the
      search criteria.  For SORT, these are message sequence numbers;
      for UID SORT, these are unique identifiers.  Each number is
      delimited by a space.

   Example:    S: * SORT 2 3 6

BASE.7.2.THREAD. THREAD Response

   Data:       zero or more threads

      The THREAD response occurs as a result of a THREAD or UID THREAD
      command.  It contains zero or more threads.  A thread consists of
      a parenthesized list of thread members.

      Thread members consist of zero or more message numbers, delimited
      by spaces, indicating successive parent and child.  This continues
      until the thread splits into multiple sub-threads, at which point,
      the thread nests into multiple sub-threads with the first member
      of each sub-thread being siblings at this level.  There is no
      limit to the nesting of threads.

      The messages numbers refer to those messages that match the search
      criteria.  For THREAD, these are message sequence numbers; for UID
      THREAD, these are unique identifiers.

   Example:    S: * THREAD (2)(3 6 (4 23)(44 7 96))

      The first thread consists only of message 2.  The second thread
      consists of the messages 3 (parent) and 6 (child), after which it
      splits into two sub-threads; the first of which contains messages
      4 (child of 6, sibling of 44) and 23 (child of 4), and the second
      of which contains messages 44 (child of 6, sibling of 4), 7 (child
      of 44), and 96 (child of 7).  Since some later messages are
      parents of earlier messages, the messages were probably moved from
      some other mailbox at different times.



Crispin & Murchison         Standards Track                    [Page 13]
RFC 5256                       IMAP Sort                       June 2008


            -- 2

            -- 3
               \-- 6
                   |-- 4
                   |   \-- 23
                   |
                   \-- 44
                        \-- 7
                            \-- 96

   Example:    S: * THREAD ((3)(5))

      In this example, 3 and 5 are siblings of a parent that does not
      match the search criteria (and/or does not exist in the mailbox);
      however they are members of the same thread.

5.  Formal Syntax of SORT and THREAD Commands and Responses

   The following syntax specification uses the Augmented Backus-Naur
   Form (ABNF) notation as specified in [ABNF].  It also uses [ABNF]
   rules defined in [IMAP].

sort            = ["UID" SP] "SORT" SP sort-criteria SP search-criteria

sort-criteria   = "(" sort-criterion *(SP sort-criterion) ")"

sort-criterion  = ["REVERSE" SP] sort-key

sort-key        = "ARRIVAL" / "CC" / "DATE" / "FROM" / "SIZE" /
                  "SUBJECT" / "TO"

thread          = ["UID" SP] "THREAD" SP thread-alg SP search-criteria

thread-alg      = "ORDEREDSUBJECT" / "REFERENCES" / thread-alg-ext

thread-alg-ext  = atom
                    ; New algorithms MUST be registered with IANA

search-criteria = charset 1*(SP search-key)

charset         = atom / quoted
                    ; CHARSET values MUST be registered with IANA

sort-data       = "SORT" *(SP nz-number)

thread-data     = "THREAD" [SP 1*thread-list]




Crispin & Murchison         Standards Track                    [Page 14]
RFC 5256                       IMAP Sort                       June 2008


thread-list     = "(" (thread-members / thread-nested) ")"

thread-members  = nz-number *(SP nz-number) [SP thread-nested]

thread-nested   = 2*thread-list

   The following syntax describes base subject extraction rules (2)-(6):

subject         = *subj-leader [subj-middle] *subj-trailer

subj-refwd      = ("re" / ("fw" ["d"])) *WSP [subj-blob] ":"

subj-blob       = "[" *BLOBCHAR "]" *WSP

subj-fwd        = subj-fwd-hdr subject subj-fwd-trl

subj-fwd-hdr    = "[fwd:"

subj-fwd-trl    = "]"

subj-leader     = (*subj-blob subj-refwd) / WSP

subj-middle     = *subj-blob (subj-base / subj-fwd)
                    ; last subj-blob is subj-base if subj-base would
                    ; otherwise be empty

subj-trailer    = "(fwd)" / WSP

subj-base       = NONWSP *(*WSP NONWSP)
                    ; can be a subj-blob

BLOBCHAR        = %x01-5a / %x5c / %x5e-ff
                    ; any CHAR8 except '[' and ']'.
                    ; SHOULD comply with [UTF-8]

NONWSP          = %x01-08 / %x0a-1f / %x21-ff
                    ; any CHAR8 other than WSP.
                    ; SHOULD comply with [UTF-8]

6.  Security Considerations

   The SORT and THREAD extensions do not raise any security
   considerations that are not present in the base [IMAP] protocol, and
   these issues are discussed in [IMAP].  Nevertheless, it is important
   to remember that [IMAP] protocol transactions, including message
   data, are sent in the clear over the network unless protection from
   snooping is negotiated, either by the use of STARTTLS, privacy
   protection in AUTHENTICATE, or some other protection mechanism.



Crispin & Murchison         Standards Track                    [Page 15]
RFC 5256                       IMAP Sort                       June 2008


   Although not a security consideration, it is important to recognize
   that sorting by REFERENCES can lead to misleading threading trees.
   For example, a message with false References: header data will cause
   a thread to be incorporated into another thread.

   The process of extracting the base subject may lead to incorrect
   collation if the extracted data was significant text as opposed to a
   subject artifact.

7.  Internationalization Considerations

   As stated in the introduction, the rules of I18NLEVEL=1 as described
   in [IMAP-I18N] MUST be followed; that is, the SORT and THREAD
   extensions MUST collate strings according to the i;unicode-casemap
   collation described in [UNICASEMAP].  Servers SHOULD also advertise
   the I18NLEVEL=1 extension.  Alternatively, a server MAY implement
   I18NLEVEL=2 (or higher) and comply with the rules of that level.

   As discussed in [IMAP-I18N] section 4.5, all server implementations
   should eventually be updated to support the [IMAP-I18N] I18NLEVEL=2
   extension.

   Translations of the "re" or "fw"/"fwd" tokens are not specified for
   removal in the base subject extraction process.  An attempt to add
   such translated tokens would result in a geometrically complex, and
   ultimately unimplementable, task.

   Instead, note that [RFC2822] section 3.6.5 recommends that "re:"
   (from the Latin "res", meaning "in the matter of") be used to
   identify a reply.  Although it is evident that, from the multiple
   forms of token to identify a forwarded message, there is considerable
   variation found in the wild, the variations are (still) manageable.
   Consequently, it is suggested that "re:" and one of the variations of
   the tokens for a forward supported by the base subject extraction
   rules be adopted for Internet mail messages, since doing so makes it
   a simple display-time task to localize the token language for the
   user.

8.  IANA Considerations

   [IMAP] capabilities are registered by publishing a standards track or
   IESG-approved experimental RFC.  This document constitutes
   registration of the SORT and THREAD capabilities in the [IMAP]
   capabilities registry.







Crispin & Murchison         Standards Track                    [Page 16]
RFC 5256                       IMAP Sort                       June 2008


   This document creates a new [IMAP] threading algorithms registry,
   which registers threading algorithms by publishing a standards track
   or IESG-approved experimental RFC.  This document constitutes
   registration of the ORDEREDSUBJECT and REFERENCES algorithms in that
   registry.

9.  Normative References

   [ABNF]        Crocker, D., Ed., and P. Overell, "Augmented BNF for
                 Syntax Specifications: ABNF", STD 68, RFC 5234, January
                 2008.

   [CHARSET]     Freed, N. and J. Postel, "IANA Charset Registration
                 Procedures", BCP 19, RFC 2978, October 2000.

   [IMAP]        Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL -
                 VERSION 4rev1", RFC 3501, March 2003.

   [IMAP-I18N]   Newman, C., Gulbrandsen, A., and A. Melnikov, "Internet
                 Message Access Protocol Internationalization", RFC
                 5255, June 2008.

   [KEYWORDS]    Bradner, S., "Key words for use in RFCs to Indicate
                 Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2822]     Resnick, P., Ed., "Internet Message Format", RFC 2822,
                 April 2001.

   [UNICASEMAP]  Crispin, M., "i;unicode-casemap - Simple Unicode
                 Collation Algorithm", RFC 5051, October 2007.

   [UTF-8]       Yergeau, F., "UTF-8, a transformation format of ISO
                 10646", STD 63, RFC 3629, November 2003.

10.  Informative References

   [IMAP-MODELS] Crispin, M., "Distributed Electronic Mail Models in
                 IMAP4", RFC 1733, December 1994.

   [THREADING]   Zawinski, J. "Message Threading",
                 http://www.jwz.org/doc/threading.html, 1997-2002.










Crispin & Murchison         Standards Track                    [Page 17]
RFC 5256                       IMAP Sort                       June 2008


Authors' Addresses

   Mark R. Crispin
   Panda Programming
   6158 NE Lariat Loop
   Bainbridge Island, WA 98110-2098

   Phone: +1 (206) 842-2385
   EMail: IMAP+SORT+THREAD@Lingling.Panda.COM


   Kenneth Murchison
   Carnegie Mellon University
   5000 Forbes Avenue
   Cyert Hall 285
   Pittsburgh, PA  15213

   Phone: +1 (412) 268-2638
   EMail: murch@andrew.cmu.edu
































Crispin & Murchison         Standards Track                    [Page 18]
RFC 5256                       IMAP Sort                       June 2008


Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.












Crispin & Murchison         Standards Track                    [Page 19]
  1. RFC 5256