Home
You are not currently signed in.

RFC4688

  1. RFC 4688
Network Working Group                                         S. Rushing
Request for Comments: 4688                                      Inmedius
Category: Informational                                     October 2006


              A Uniform Resource Name (URN) Namespace for
     Aerospace and Defence Industries Association of Europe (ASD)
                          Specification 1000D

Status of This Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This document describes a Uniform Resource Name (URN) namespace for
   naming persistent resources defined by Aerospace and Defence
   Industries Association of Europe (ASD) Specification 1000D.

Table of Contents

   1. Introduction ....................................................2
   2. Specification Template ..........................................2
   3. Examples ........................................................5
   4. Security Considerations .........................................6
   5. Namespace Considerations and Community Considerations ...........6
   6. IANA Considerations .............................................6
   7. Normative References ............................................6

















Rushing                      Informational                      [Page 1]
RFC 4688       URN Namespace for ASD Specification 1000D    October 2006


1.  Introduction

   Specification 1000D [1] (S1000D) is an international specification
   for the procurement and production of technical publications.  The
   current issue of the specification has been jointly produced by the
   Aerospace and Defence Industries Association of Europe (ASD;
   previously AECMA, European Association of Aerospace Industries) and
   the Aerospace Industries Association of America (AIA).  The
   specification is used worldwide by a variety of commercial and
   government entities for the development of technical documentation.

   The specification adopts ISO, Computer-Aided Acquisition and Life-
   Cycle Support (CALS), and W3C standards to promote document
   standardization in which information is generated in a neutral
   format.  Compliant documentation generated using the specification
   can be processed on different, and often disparate, IT systems.  It
   is this feature, added to the concept of modularization, that makes
   the specification acceptable to the wider international community.

   Portions of S1000D define a resource coding system allowing resources
   created under the specification to be uniquely identified in global
   environment.  To provide for the creation of a web-based resource
   management system, ASD would like to assign URNs [2][3][4] to
   resources created under the specification in order to retain unique,
   permanent, location-independent names for these resources, in
   addition to providing a framework for resolution of these resources.

   For more information about ASD and S1000D, see http://www.s1000d.org.

   This namespace specification is for a formal namespace.

2.  Specification Template

   Namespace ID:

      To be assigned.  Request the string "S1000D".

   Registration information:

      Version 2
      Date: <2005-03-7, when submitted>

   Declared registrant of the namespace:

      Name:
                      ASD TPSMG Chairperson





Rushing                      Informational                      [Page 2]
RFC 4688       URN Namespace for ASD Specification 1000D    October 2006


      Address:
                      Corporate Technical Services
                      Technical Documentation
                      Kentigern House
                      65 Brown Street
                      Glasgow G2 8EX
                      UK
      Contact:
                      Mr. Dennis Hoyland
                      E-mail: adcts@techinfo.mod.uk

   Declaration of structure:

      The identifier has the following ABNF [5] structure.

      ;start ABNF notation

      URN = "URN:" namespace NSS

      namespace = "S1000D:"

      NSS = dmc-nss / pmc-nss / csn-nss / icn-nss
            com-nss / ddn-nss / dml-nss

      ;Define the subnamespace as an subnamespace identifier
      ;plus a subnamespace code string
      dmc-nss = "DMC-" nss-code
      pmc-nss = "PMC-" nss-code
      csn-nss = "CSN-" nss-code
      icn-nss = "ICN-" nss-code
      com-nss = "COM-" nss-code
      ddn-nss = "DDN-" nss-code
      dml-nss = "DML-" nss-code

      ;Define the subnamespace code as a string encoded to the
      ;format specified by the namespace identifier and an
      ;optional extension string indicating the resource status.
      nss-code = subcode subext

      ;The code strings are a groups of alpha and digit characters
      ;separated by the dash character.  The specific code syntax
      ;for each subnamespace is described in ASD Specification 1000D.
      subcode = 1*(DIGIT / ALPHA / "-")

      ;Define the encoding extension as an optional set of status
      ;indicators separated by the "_" character.
      subext = [issue] [lang]
      issue  = "_I-" 3DIGIT



Rushing                      Informational                      [Page 3]
RFC 4688       URN Namespace for ASD Specification 1000D    October 2006


      lang   = "_L-" 2ALPHA

      ;ABNF core rules RFC 2234, listed for clarity
      ;ALPHA  =  %x41-5A / %x61-7A   ; A-Z / a-z
      ;DIGIT  =  %x30-39             ; 0-9

      ;end ABNF notation

      The following subnamespaces are currently defined:

       "DMC" - contains all Data Modules Codes
       "PMC" - contains all Publication Module Codes
       "CSN" - contains all Catalogue Sequence Numbers
       "ICN" - contains all Illustration Control Numbers.
       "COM" - contains all Comment Codes.
       "DDN" - contains all Data Dispatch Notices.
       "DML" - contains all Data Module Lists.

      Example usage:

      URN:S1000D:{subid}-{subcode}_{subext}

      e.g., URN:S1000D:DMC-AE-A-07-05-0000-00A-040A-A_I-001_L-EN

      where:
      {subid}   = DMC, The code is a Data Module Code
      {subcode} = AE-A-07-05-0000-00A-040A-A, String in DMC syntax
      {subext}  = _I-001_L-EN, the first issue in English.

   Relevant ancillary documentation:

      ASD S1000D, Issue 2.2
      Reference: Chap 7.4.1.2, "IETP - Resource resolution"
      url: http://www.s1000d.org

   Identifier uniqueness considerations:

      Identifier uniqueness is guaranteed through processes outlined
      within ASD S1000D.  All codes defined within the specification
      must begin with a Model Identifier (MI) that will be registered
      with the NATO Maintenance and Supply Agency (NAMSA) and is never
      to be reused.  All project-generated codes are prefixed by the
      assigned MI and are required by the specification to be unique
      within the scope of the project.  Since all project codes are
      prefixed by a globally unique MI, and since these codes must be
      unique within the project, all generated identifiers will be
      globally unique.




Rushing                      Informational                      [Page 4]
RFC 4688       URN Namespace for ASD Specification 1000D    October 2006


   Identifier persistence considerations:

      Persistence of identifiers is dependent upon suitable delegation
      of resolution and the fact that generated identifiers are to be
      persistent once published.  Existing information objects can be
      used in new projects by referencing them through their persistent
      identifiers.

   Process of identifier assignment:

      Identifiers are assigned in the following manner.  Projects are
      assigned a Model Identifier by the NAMSA organization.  Projects
      then generate identifiers using the processes outlined in ASD
      S1000D.  The codes are prefixed with the encoding identifier and
      possibly postfixed by the extension status identifiers.

   Process for identifier resolution:

      The project identified by the Model Identifier is responsible for
      providing a method of resource resolution.  A suggested method of
      resolution is outlined in ASD S1000D.

   Rules for Lexical Equivalence:

      All generated identifiers are to be considered case-insensitive.

   Conformance with URN syntax:

      No special considerations.

   Validation mechanism:

      Identifiers must conform to ASD S1000D.

   Scope:

      Global.

3.  Examples

   The following examples are not guaranteed to be real and are provided
   for illustrative purposes only.

      URN:S1000D:DMC-AE-A-07-04-0101-00A-040A-A
      URN:S1000D:DMC-AE-A-07-05-0000-00A-040A-A_I-001_L-EN
      URN:S1000D:ICN-AE-B-291101-M-C0419-00571-A-01-1
      URN:S1000D:PMC-AE-F6117-00001-00




Rushing                      Informational                      [Page 5]
RFC 4688       URN Namespace for ASD Specification 1000D    October 2006


4.  Security Considerations

   There are no additional security considerations other than those
   normally associated with the use and resolution of URNs in general.

5.  Namespace Considerations and Community Considerations

   Resources will be named and maintained in accordance with the
   processes described in this document, in addition to the processes
   described in S1000D.  Any organization or individual can utilize the
   specification to create resources described by S1000D.  Resolution
   and/or use of created resources is unrestricted by the specification
   in order to promote widespread adoption of open ASD standards,
   although organizations creating resources may control them as they
   see fit.

6.  IANA Considerations

   This document describes a "S1000D" URN NID registration for the
   S1000D organization and has been entered into the IANA registry of
   URN NIDs (http://www.iana.org/assignments/urn-namespaces).

7.  Normative References

   [1]  "ASD Specification 1000D", May 2005.

   [2]  Moats, R., "URN Syntax", RFC 2141, May 1997.

   [3]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
        Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986,
        January 2005.

   [4]  Daigle, L., van Gulik, D., Iannella, R., and P. Faltstrom,
        "Uniform Resource Names (URN) Namespace Definition Mechanisms",
        BCP 66, RFC 3406, October 2002.

   [5]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
        Specifications: ABNF", RFC 4234, October 2005.













Rushing                      Informational                      [Page 6]
RFC 4688       URN Namespace for ASD Specification 1000D    October 2006


Author's Address

   Sean Rushing
   Inmedius, Inc.
   2710 South Kolb Road
   Tucson, AZ  85730
   USA

   Phone: +01 520 747 3955
   EMail: srushing@inmedius.com









































Rushing                      Informational                      [Page 7]
RFC 4688       URN Namespace for ASD Specification 1000D    October 2006


Full Copyright Statement

   Copyright (C) The Internet Society (2006).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).







Rushing                      Informational                      [Page 8]
  1. RFC 4688